Behringer Ep2000 2x750 Watt Power Amplifier-METEOR MUZIK SES ISIK KONFERANS SISTEMLERI LTD-TURKIYE--AMPLIFIKATOR

Konferans Salonu ses sistemi Sennheiser Yamaha Ses Sistemleri Satılık mağazaları müzik market, Okul için Hoparlör moving head fiyatları stok jbl mağazası izmir stok var durumu Club audio stüdyo Amplifikator power anfi Kiralık Teknik Servis akustik sahne tasarımı fiyatı Bosch Anons sistemi çok amaçlı salon sistemleri fiyat listesi okul tören alanı için ekonomik telsiz veya kablosuz mikrofon, Hoparlör yapımı tweeter tiz subbass yedek parça, teknik özellikleri yazı yazmak yazabilen yapabilen atabilen komponent ciplak hoparlor B&C rcf eminence passive active speaker UHF wireless dual microphone tamiri

Konferans Ses Sistemi içinTeklif şartname talebi isteği

Behringer EP2000 2x750 watt 4 Ohm Power Amplifier

2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)

Precise Power, Signal and Clip LEDs to monitor performance

XLR and 1/4" TRS input connectors for compatibility with any source

Professional speaker connectors and “touch-proof” binding posts support most speaker wiring systems

Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies

Independent limiters per channel offer reliable protection against overload and distortion

High-current toroidal transformer for ultra-high transient response and absolute reliability

Ultra-reliable Toshiba/Fairchild power transistors

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show

“Back-to-front” ventilation system including air filter for reliable operation

“Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis

Output Power:

20Hz–20kHz @ 0.1% THD, both channels driven:

8 ohms per channel - 350W

4 ohms per channel - 500W

2 ohms per channel - 650W

RMS @ 1% THD (sine wave), bridged mode:

8 ohms - 1000W

4 ohms - 1300W

Peak power, both channels driven:

8 ohms per channel - 400W

4 ohms per channel - 750W

2 ohms per channel - 1000W

Peak power, bridged mode:

8 ohms - 1500W

4 ohms - 2000W

Distortion: <0.01%

Frequency Response:

At 10 dB below rated output power - 20Hz–20kHz,

At -3 dB points - 5Hz–50kHz

Damping Factor: >300 at 8 ohms

Noise: -100 dB unweighted, 20Hz–20kHz

Voltage Gain: 40X (32dB)

Input sensitivity: 1.15V (+3.4 dBu) VRMS at 8 ohms

Input impedance: 10kOhm unbalanced, 20kOhm balanced

Controls:

Front: Power switch, gain control (channels 1 and 2)

Rear: DIP switches (10x)

Indicators:

Power: Green LED

Clip: Red LED, 1 per channel

Signal: Yellow LED, 1 per channel

Inputs: Balanced XLR and 1/4" TRS connectors

Outputs: Touch-proof binding posts and professional speaker connectors

Cooling: Continuously variable-speed fan, back-to-front airflow

Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection

Load Protection: Turn on/off muting, AC coupling

Circuit Type: Class AB complementary linear output

Power Supply:

Mains Voltage/Breaker: 100–120V~, 50/60Hz15A

Power Consumption: 1600W

Dimensions: 19" W x 3-1/2" H x 15-4/5" D

Weight: 35 lb.