< < Önceki Sayfaya Dön
Shure Yaka Telsiz Setler SHURE GLXD14E/85 SHURE GLXD14E/85 Yaka Tipi Telsiz Mikrofon SetiXML
Shure Yaka Telsiz Setler SHURE GLXD14E/85 SHURE GLXD14E/85 Yaka Tipi Telsiz Mikrofon SetiXML

SHURE GLXD14E/85 Yaka Tipi Telsiz Mikrofon Seti

Marka : Shure

Bayi Girişi Yapınız

Barkod : 74898
Favorilere Ekle
İstek Listeme Ekle
Karşılaştır
Fiyat Düşünce Haber Ver
Gelince Haber Ver
Tavsiye Et
Sayfayı Yazdır
Yorum Yaz

The GLXD14/WL185 Lavalier Wireless System from Shure includes a GLXD1 bodypack transmitter, a GLXD4 receiver, and a WL185 cardioid lavalier microphone. The system operates on the 2.4GHz ISM band in the Z2 frequency band between 2400 and 2483.5MHz.

Both the GLXD1 transmitter and the GLXD4 receiver feature Shure's LINKFREQ automatic frequency management that allows them to scan for the clearest frequency available and automatically link to each other without any setup required from you besides turning both units on. With their continuous interference monitoring, both the transmitter and receiver automatically switch to the clearest frequencies available to avoid interference and dropouts. The GLXD1 includes a rechargeable battery pack that provides up to 16 hours of operation of a full charge. The system has a 200' range of operation and can be used with 7 other GLX-D systems simultaneously.

A WL185 cardioid lavalier is included for your miking needs. It has a tie clip that can be rotated in 90° intervals for flexibility in placement.
 

This Bundle Includes:

  • GLXD4 Digital Wireless Receiver (Z2 Band: 2400 - 2483.5 MHz)
  • GLXD1 Bodypack Transmitter (Z2 Band: 2400 - 2483.5 MHz)
  • WL185 Cardioid Lavalier Microphoneü

GLXD4 Receiver : Z2 (2400 / 2483,5 Mhz)

  • 2.4 GHz ISM Band
  • Z2 Frequency Band
  • For Use with GLX-D Wireless Systems
  • LINKFREQ Automatic Frequency Management
  • Integrated Battery Charge Port
  • Continuous Interference Monitoring
  • Front-Panel LCD Screen
  • Use up to 8 Systems Simultaneously
Outputs 1x XLR Output
1x 1/4" (6.35 mm) Output
Output Impedance XLR: 100 Ω
1/4": 100 Ω, 50 Ω unbalanced
Maximum Audio Output Level Analog XLR: 1 dBV (into 600 Ω load)
1/4": 8.5 dBV (into 3 kΩ load)
Tuning Frequency Range 2400 to 2483.5 MHz
Range of Operation 200' (60 m) (typical, depends on RF signal absorption, reflection, and interference)
Transmit Mode Frequency Hopping
Frequency Response 20 Hz to 20 kHz
Dynamic Range 120 dB, A-weighted
RF Sensitivity -88 dBm, typical
Total Harmonic Distortion 0.2%, typical
RF Output 10 mW E.I.R.P., maximum
Operating Temperature Range 0° to 135°F (-18° to 57°C)
Storage Temperature Range -20° to 165°F (-29° to 74°C)
Pin Configuration XLR: 1= ground, 2= hot, 3=cold
1/4": Tip= audio, ring= no audio, sleeve= ground
Antenna Impedance: 50 Ω
Type: 1/2 wave sleeve dipole, non-removable
Max Input Level: -20 dBm
Power Requirements 14 to 18 V DC (tip positive with respect to ring), 550 mA
Spurious Rejection >35 dB, typical
Gain Adjustment Range -20 to 40 dB in 1 dB steps
Phantom Power Protection Yes
Housing Molded plastic
Dimensions (HxWxD) 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm)
Weight 10.1 oz (286 g)

 

GLXD1 Bodypack Transmitter Features: 

  • 2.4 GHz ISM Band
  • Z2 Frequency Band
  • For Use with GLX-D Wireless Systems
  • 200' Range of Operation
  • TA4M 4-Pin Connector
  • Automatic Link with Transmitter
  • Includes Rechargeable Battery Pack
  • Up to 16 Hours Per Charge
  • Metal Construction
Connector 1x Unbalanced 4-pin TA4M male mini-connector
Tuning Frequency Range 2400 to 2483.5 MHz
Range of Operation 200' (60 m) (typical, depends on RF signal absorption, reflection, and interference)
Transmit Mode Frequency Hopping
Frequency Response 20 Hz to 20 kHz
Dynamic Range 120 dB, A-weighted
RF Sensitivity -88 dBm, typical
Total Harmonic Distortion 0.2%, typical
RF Output 10 mW E.I.R.P, maximum
Operating Temperature Range 0° to 135°F (-18° to 57°C)
Storage Temperature Range -20° to 165°F (-29° to 74°C)
Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output
Battery Life Up to 16 hours
Power Requirements 3.7 V Rechargeable Li-Ion
Input Impedance 900 kΩ
RF Output 10 mW E.I.R.P. maximum
Maximum Input Level 1 kHz at 1% THD
8.4 dBV (7.5 Vp-p)
Antenna Internal Monopole
Pin Configuration 1: ground (cable shield)
2: +5 V bias
3: Audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Housing Cast Metal
Dimensions (H x W x D) 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna

WL185 Lavalier Microphone

Transducer Electret Bias
Polar Pattern Cardioid
Frequency Response 50Hz to 17kHz
Dynamic Range (Typical) 102dB
Signal-to-Noise Ratio 18dB SPL (A-weighted)
Maximum Input Sound Level 130dB
Power Requirements Regulated Nominal +5 Vdc (2 Vdc to 10 Vdc)
Output Impedance 28 ohms
Output Connectors TA4-Female
Pad No
Low Frequency Roll-Off No
Dimensions Cable length: 4 foot (1.2 meter)

 

Marka Arama