Shure SM Wireless Microphones deliver an unparalleled mix of audio quality and rugged dependability that has made them the industry standard in professional sound. They are built to withstand the rigors of regular stage and studio use. All microphoneapplications are covered with Analogue and Digital Wireless Receivers. The Digital Wireless Receiver combines automatic frequency management with true digital diversity for a rock-solid wireless signal with exceptional digital audio clarity. Shure proprietary lithium ion rechargeable batteries provide up to 16 hours of continuous use.
Set consisting of:
GLXD4 Receiver : Z2 (2400 / 2483,5 Mhz)
Outputs | 1x XLR Output 1x 1/4" (6.35 mm) Output |
Output Impedance | XLR: 100 Ω 1/4": 100 Ω, 50 Ω unbalanced |
Maximum Audio Output Level Analog | XLR: 1 dBV (into 600 Ω load) 1/4": 8.5 dBV (into 3 kΩ load) |
Tuning Frequency Range | 2400 to 2483.5 MHz |
Range of Operation | 200 (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
Transmit Mode | Frequency Hopping |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | 120 dB, A-weighted |
RF Sensitivity | -88 dBm, typical |
Total Harmonic Distortion | 0.2%, typical |
RF Output | 10 mW E.I.R.P., maximum |
Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
Pin Configuration | XLR: 1= ground, 2= hot, 3=cold 1/4": Tip= audio, ring= no audio, sleeve= ground |
Antenna | Impedance: 50 Ω Type: 1/2 wave sleeve dipole, non-removable Max Input Level: -20 dBm |
Power Requirements | 14 to 18 V DC (tip positive with respect to ring), 550 mA |
Spurious Rejection | >35 dB, typical |
Gain Adjustment Range | -20 to 40 dB in 1 dB steps |
Phantom Power Protection | Yes |
Housing | Molded plastic |
Dimensions (HxWxD) | 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm) |
Weight | 10.1 oz (286 g) |
GLXD1 Bodypack Transmitter Features:
Connector | 1x Unbalanced 4-pin TA4M male mini-connector |
Tuning Frequency Range | 2400 to 2483.5 MHz |
Range of Operation | 200 (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
Transmit Mode | Frequency Hopping |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | 120 dB, A-weighted |
RF Sensitivity | -88 dBm, typical |
Total Harmonic Distortion | 0.2%, typical |
RF Output | 10 mW E.I.R.P, maximum |
Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output |
Battery Life | Up to 16 hours |
Power Requirements | 3.7 V Rechargeable Li-Ion |
Input Impedance | 900 kΩ |
RF Output | 10 mW E.I.R.P. maximum |
Maximum Input Level | 1 kHz at 1% THD 8.4 dBV (7.5 Vp-p) |
Antenna | Internal Monopole |
Pin Configuration | 1: ground (cable shield) 2: +5 V bias 3: Audio 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats) |
Housing | Cast Metal |
Dimensions (H x W x D) | 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna |
MX153 TQG Earset Features:
Transducer | Electret Condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 20Hz to 20kHz |
Sensitivity | Open circuit voltage, @ 1kHz, typical: -41dBV/Pa (9 mV/Pa) |
Maximum Input Sound Level | 1kHz at 1% THD: 2500 Ω load: 107 dB SPL 1000 Ω load: 107 dB SPL |
Signal-to-Noise Ratio | 60dB |
Dynamic Range (Typical) | @ 1kHz 2500 Ω load: 73 dB 1000 Ω load: 73 dB |
Self Noise | Equivalent SPL, A-weighted, typical: 34dB |
Common Mode Rejection | 20Hz to 20kHz |
Operating Temperature | 0 to 135° F (-18 to 57° C) |
Polarity | Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1. |
Power Requirements | +1 - 5VDC (500 μA max.) |
Dimensions | Cable Length: 48" (1.21m) |
Weight | 0.69oz (19.76g) |