The Eurocom SN2408 80-Watt Mixer and Dual Amplifier from Behringer is designed for continuous operation in distributed music, paging, and AV applications in bars, recreation facilities, conference rooms, hotels, and other venues. It is powered by two independent Class-D mono amplifiers with DC and thermal overload protection. The first amplifier has a high impedance output and can be set to either 70 or 100 volts. The second amplifier has a standard low-impedance output.
The SN2408 features a variety of inputs including three mic/line combination XLR/TRS inputs as well as three mic/line four-pin Euroblock connectors, all with assignable phantom power. The unit also features dual stereo summed RCA auxiliary inputs for playback from external sources and a 3-pin Euroblock input for telephone or paging purposes. It features a 4-pin Euroblock main output as well as a 3-pin Euroblock Zone 2 output with assignable inputs. Rear-panel DIP switches allow you to route individual sources to the Zone 2 output.
| Inputs | Microphone Inputs: 3x Combo XLR/TRS jacks 3x 4-pin Euroblock connectors Auxiliary Inputs: 2x Stereo RCA (summed) Telephone/Page Input: 1x 3-pin Euroblock connector Amp Inputs: 2x RCA |
| Outputs | Zone 1 Speaker Output: 1x 4-pin Euroblock connector (LO-Z and HI-Z) Zone 2 Line Level Output: 1x 3-pin Euroblock connector Preamp Outputs: 2x RCA |
| Input Impedance | Microphone Combo XLR/TRS Inputs: -50 dBv @ 600 Ω (balanced) Euroblock Inputs: 0 dBv @ 10 k Ω (balanced) |
| Output Impedance | 4 dBV @ 600 Ω balanced |
| Phantom Power | 24 VDC |
| Amplifier | Channels: LO-Z: 1x 4 Ω (minimum) HI-Z: 1x 70/100 V (switchable) Power Output LO-Z: 80 W RMS @ 8 Ω, 1 % THD, 1 kHz sine wave, minimum 4 Ω Power Output HI-Z: 80 W RMS @ 70 V (minimum 62.5 Ω) 160 W RMS @ 100 V (minimum 62.5 Ω, 1 % THD @ 1 kHz sine wave) |
| Controls | 3x Mic/Line gain (inputs 1 to 5) 1x Lo Tone knob ± 15 dB @ 100 Hz 1x Hi Tone knob ± 15 dB @ 10 kHz 1x Master Volume knob 1x Telephone/Page Level knob 1x Zone 2 Send Level knob 1x Mute Depth knob 1x Power On/Off switch 1x Voltage 115/230 VAC switch 1x HI-Z Mode 70/100 V switch 3x Phantom/Mic/Line 3 position DIP switch 1x Mute Assign 8-position DIP switch 1x Output Assign 8-position switch |
| Indicators | 1x Dual-function indicator ring (yellow - power on; red - clip) |
| Circuit | Type: 2x Transformerless Class D Dual Output: LO-Z & HI-Z |
| Protection | Amplifier: Thermal and DC protection, automatic limiters |
| Frequency Response | 50 Hz to 218 kHz (± 1 dB @ 1 W, 70 / 100 V) |
| Dynamic Range | Mic: 65 dB Auxiliary: 80 dB Telephone/Page: 78 dB |
| Total Harmonic Distortion/Noise | 0.05 % @ 1 W (1 kHz dBr into 8 Ω load) |
| Signal to Noise Ratio | 90 dB @ 1% THD+N |
| Power Supply | Mains Voltage: 100 to 120 VAC (switchable), 220 to 240 VAC, 50/60 Hz Fuse: T 6.3 A H 250 V Power Efficiency: 70% Power Consumption: 80 W @ 1/8 of maximum rated output Mains Connector: Standard IEC receptacle |
| Dimensions (H x W x D) | 3.3 x 12.0 x 14.2' (8.3 x 30.5 x 36.0 cm) |
| Weight | 9.2 lb (4.2 kg) |
