All-in-one for Easy Operation and Fast Setup
The EMX5014C integrates mixer, power amplifier, graphic EQ, and digital effects into a compact, portable unit. No need for complex setup and wiring — simply plug in and play! The entire system is optimized, so it s easy to get great sound just about anywhere.
Superior Sound through Painstaking Design and Parts Selection
Parts selection is crucial to achieving the best possible sound, and Yamaha spares no effort in selecting the best. The critical head amplifier circuit, for example, uses special low-noise chip resistors that are deposited on a thin film of nichrome for accurate, noise-free reproduction. Special care has also been taken in laying out the system s grounding as well as the circuitry in general to ensure that no unwanted noise or interference degrades the quality of the sound
General specifications
| Maximum output power | 500W + 500W (4ohms),
370W + 370W (8ohms/ AC100V model)
350W + 350W (8ohms/ AC120V model)
320W + 320W (8ohms/ AC220-240V model)
@1kHz, THD+N≤0.5% |
Total harmonic distortion
(THD+N) @ 20-20kHz | Less than 0.3%, +14dBu output into 600ohms |
Frequency response
GAIN=Minimum, PAD=OFF | 0, +0, -3dB, 20Hz-20kHz, 0dB @1kHz |
Equivalent input noise
GAIN=Maximum, 20-20kHz | -128dBu |
Crosstalk
@ 1kHz | -68dB, adjacent inputs |
| -68dB, input to output |
| Phantom voltage | +48V on CH1-6,7/8,9/10 |
Channel equalizer
+15,-15dB Maximum | HIGH: 10kHz (Shelving) |
| MID(MONO): 250Hz-5kHz (Peaking) |
| MID(ST) 2.5kHz (Peaking) |
| LOW: 100Hz (Shelving) |
| Channel peak indicator | LED turns on when post EQ signal reaches -3dB below clipping |
| Channel signal indicator | LED turns on when post EQ signal reaches -10dB |
| FCL indicator | input level: -75dB |
LED Level meter
(ST, PFL/AFL) | 2*12 points LED meter (PEAK,+5,+3,+1,0,-1,-3,-5,-7,-10,-15,-20 dB)
PEAK lights if the signal comes within 3 dB of the clipping level. |
Graphic equalizer
(ST OUT) | 9 band (63,125,250,500,1k,2k,4k,8k,16k Hz), +12/-12 dB Maximum |
| Effect | 16 programs, Parameter control
Foot switch(FC5:Option) Digital Effect ON/OFF |
| Power amplifier protection | POWER switch on/off mute
DC-fault
Thermal / heatsink temp≥90 & degrees celsius
Vl limiter / RL≤2 ohms
Clip limiter / THD≥1%, Indicator x 2 |
| Power supply protection | Thermal / heatsink temp≥100 degrees celsius |
| Cooling | Variable-speed fan ( x 2) |
| Power consumption | Japan: | AC100V 50/60Hz, 500W |
| North America: | AC120V, 60Hz, 500W |
| Other Areas: | AC220-240V, 50/60Hz, 500W |
Dimensions
(W x H x D) | 444 x 155 x 493 mm / 17.48 x 6.1 x 19.41in |
| Weight | 10.5kg / 23.15 |
Input characteristics
| Input terminal | PAD | GAIN | Actual load impedance | For use with nominal | Input level | Connector |
|---|
| Sensitivity | Nominal | Max. before clip |
|---|
| CH INPUT A 1-6 | 0dB | -60dB | 3kohms | 50-600 ohm Mics | -80dBu | -60dBu | -40dBu | XLR-3-31 type *3 |
| -16dB | -36dBu | -16dBu | +4dBu |
| 26dB | -34dB | -54dBu | -34dBu | -14dBu |
| +10dB | -10dBu | +10dBu | +30dBu |
| CH INPUT B 1-6 | 0dB | -60dB | 10kohms | 600 ohm Lines | -80dBu | -60dBu | -40dBu | TRS phone jack |
| -16dB | -36dBu | -16dBu | +4dBu |
| 26dB | -34dB | -54dBu | -34dBu | -14dBu |
| +10dB | -10dBu | +10dBu | +30dBu |
ST CH INPUT
7/8-9/10 | -60dB | 3kohms | 50-600 ohm Mics | -80dBu | -60dBu | -40dBu | XLR-3-31 type |
| -16dB | -36dBu | -16dBu | -10dBu |
| -34dB | 10kohms | 600ohm Lines | -54dBu | -34dBu | -14dBu | Phone jack |
| +10dB | -10dBu | +10dBu | +30dBu |
ST CH INPUT
11/12-13/14 | -34dB | 10kohms | 600ohm Lines | -54dBu | -34dBu | -14dBu | Phone jack,
RCA pin jack |
| +10dB | -10dBu | +10dBu | +30dBu |
| CH INSERT IN (1-6) | - | 10kohms | 600ohm Lines | -20dBu | 0dBu | +20dBu | Phone jack |
* 0dBu= 0.775Vrms
Output characteristics
| Output terminal | Actual source impedance | For use with nominal | Output level | Connector |
|---|
| Nominal | Max. before clip |
|---|
| ST OUT [L,R] | 150ohms | 600ohm Lines | +4dBu | +20dBu | TRS phone jack |
| ST SUB OUT [L,R] | 150ohms | 600ohm Lines | +4dBu | +20dBu | TRS phone jack |
| AUX SEND 1,2 | 150ohms | 600ohm Lines | +4dBu | +20dBu | TRS phone jack |
| EFFECT SEND | 150ohms | 600ohm Lines | +4dBu | +20dBu | TRS phone jack |
| CH INSERT OUT 1-6 | 600ohms | 10kohm Lines | 0dBu | +20dBu | TRS phone jack |
| REC OUT [L,R] | 600ohms | 10kohm Lines | -10dBV | +10dBV | RCA pin jack |
| PHONES [L,R] | 100ohms | 8ohm / 40ohm Lines | 1mW/
3mW | 20mW/
75mW | ST phone jack |
| SPEAKER OUT | 0.1ohms | 4ohm Speakers | 125W | 500W | SPEAKON
Phone jack |
* 0dBu=0.775Vrms. 0dBV =1.0Vrms
