QSC GX3 Power Amplifier 2 channels, 300 watts/ch at 8Ohm

Stereo Mode:
- 8 Ohms / both channels driven: 300 Watts
- 8 Ohms / single channel driven: 350 Watts
- 4 Ohms / both channels driven: 425 Watts
- 4 Ohms / single channel driven: 500 Watts
- 2 Ohms / both channels driven: 200 Watts

Distortion:
- 8 Ohms: less than 0.05%
- 4 Ohms: less than 0.1%

Signal to Noise (20 Hz - 20 kHz): 100 dB

Input Sensitivity: 1.2 Vrms

Voltage Gain (8 Ohms): 32.2 dB

Output Circuitry: Class B

Power Requirements: 6.3A

Frequency Response: 20 Hz - 20 kHz, +0, 1 dB

Dynamic Headroom (4 Ohms): 2 dB

Damping Factor: 100

Input Impedance: Greater than 20k (balanced)

Maximum Input Level: +24 dB (16 Vrms)

Input Connectors (each channel): 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced

Output Connectors (each channel): Speakon, 1/4-inch, Binding Posts

Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults

Front Panel Controls and Indicators:
- Gain controls, 21 detents
- Red Clip LEDs, proportional, 0.1% THD threshold
- Green Signal LEDs, threshold -35 dB
- Blue Power LED, AC on

Rear Panel Controls: Full Range / Crossover switch

Dimensions (H x W x D): 3.5 x 19 x 10.1 inches (89 mm x 483 mm x 257 mm)

Weight: 25 lbs (11.5 kg)