Electro Voice PA2250T Power Amfi, 2X250W/100V-70V

Stok durumu veya tedarik süresini sorunuz: 0 (533) 592 49 10
  • Efficient performance for low impedance or distributed systems 
  • Ideal for sound reinforcement, paging, and life safety 
  • 250 W per channel for 4 Ω or 70/100 V lines
  • Bridged mono out for 540 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

 

Amplifier Gain

 

34.3 dB

Continuous Rated Power (1 kHzTHD 1%) 100v270 Watts
Continuous Rated Power (1 kHzTHD 1%) 4Ω270 Watts
Continuous Rated Power (1 kHzTHD 1%) 70v270 Watts
Continuous Rated Power (1 kHzTHD 1%) 8Ω135 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 100v250 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω250 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 70v250 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω125 Watts
Crosstalk< < -75 dB
DIM 30< 0.1 %
Frequency Response65Hz - 40kHz
Impedance4/8 Ω 70V/100V
Input Impedance (Balanced)> 20 kΩ
Input Sensitivity0 dBu (775mV) @ rated output power or voltage, 1kHz
Intermodulation Distortion (SMPTE)< 0.1 %
Network Control (IRIS-Net)No
Number of Channels2
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz250/125 W 70V/100V-250
Rated output power (*rated load) THD < 1%, 1kHz270/135 W 70V/100V-270
Signal-to-Noise Ratio (A-weighted)103 dB
Slew Rate18 V/µs 70V-41, 100V-61
Total Harmonic Distortion< 0.1 %
Height2RU 88 mm (3.46")
Width483 mm (19.02")
Depth406 mm (15.98")
Weight Net23.5 kg (51.81 lbs

 

{x} kişi bu ürünü inceliyor.
Yükleniyor...