JBL PRX 712M 12" Aktif Hoparlör 1500-watt 135-dB

Stok yok sipariş üzerine tedarik edilir. Lütfen iletişime geçiniz: 0 (533) 592 49 10

JBL PRX712M 12" Aktif Hoparlör, 1500W, 135 dB, 2 Yollu,

 
 
PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
 
  • 135 dB peak SPL
  • 12" Differential Drive® low-frequency driver for low-distortion and higher SPL
  • 1.5" diameter next generation JBL neodymium compression driver
  • JBL designed waveguide for accurate coverage
  • Efficient Class-D amplifier technology
  • Optimized EQ for monitor or front-of-house applications
  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
  • Line level and direct microphone input capability
  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
  • Multi-angle enclosure for main PA or floor monitor applications
  • Integrated 36 mm pole mount socket with angle down tilt
  • Injection molded handle with backing cup for easy transport
  • Integrated M10 suspension points for easy setup
  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
  • Cloth backed, dent-resistant 16 gauge steel grilles
  • PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub/sat system.
  • The PRX712 is comprised of a 12" Differential Drive® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of
    1000 lbs. each.
  • The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
 

 

 
 Power Rating1500 W
 Frequency Range (-10 dB)Main: 44.8 Hz – 19.6 kHz
Monitor: 44.8 Hz – 19.5 kHz
 Frequency Response (±3 dB)Main: 55.7 Hz – 18.2 kHz
Monitor: 56.5 Hz – 17.7 kHz
 Coverage Pattern90° x 50° nominal
 Directivity Index (DI)10.2 dB
 Directivity Factor (Q)10.4
 Crossover Frequency1.8 kHz
 Maximum SPLNormal: 135 dB
Boost: 135 dB
 Signal IndicatorsLimit: Yellow LED indicates peak output has been reached and dsp 
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio,
Red indicates system has power but is in a power saving mode and will not
pass audio.
 Dynamic Control (Input)dbx Type IV™ limiter circuit
 Input Impedance20K Ohms (balanced),10K Ohms (unbalanced)
 LF Driver1 x JBL 272G 305mm (12 in) woofer
 HF Driver1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
 EnclosureAsymmetrical, 18 mm, plywood
 Suspension / MountingDual 36 mm pole socket, 12 x M10 Suspension Points
 Transport1 x injection molded handles with backing cup
 FinishObsidian DuraFlex™ finish
 GrillePowder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
 Input Connectors2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
 Output Connectors1 male XLR balanced output
 Dimensions (H x W x D)612.394 mm x 384.556 mm x 341.376 mm
(24.11 in x 15.14 in x 13.44 in)
 Net Weight19.4 kg (42.5 lb.)

 

Hoparlör Ölçüsü12"
Benzer Ürünler
Yükleniyor...