Mackie DL32R Rack Tipi 32 Kanal Dijtal Mikser 14 Aux APP Control

Stok yok sipariş üzerine tedarik edilir. Lütfen iletişime geçiniz: 0 (533) 592 49 10

Mackie DL-32R 32 Kanal Dijital iPad Mikser


The Mackie DL32R is a 32-channel wireless digital audio mixer and USB 2.0 audio interface that allows the entire process of live sound mixing to be controlled with an iPad, and allows for personal monitor mixing with any iOS device, such as an iPhone or iPod touch. It delivers a live sound mixing experience that takes advantage of the iOS touch screen and wireless control capabilities, while providing a wealth of professional features to accommodate a wide variety of sound reinforcement and recording applications.
The DL32R features 32 microphone inputs (24 XLR + 8 XLR/TRS combo) with high-quality Onyx+ recallable preamps, capable of handling full bands that include guitars, full drum sets, vocals, and much more. It also has 14 fully assignable XLR outputs for connection to amplifiers, powered speakers, wireless transmitters for in-ear monitoring. The DL32R also allows up to 10 performing musicians to mix their own monitors using their iPhone, iPad or iPod touch.
In addition to sound reinforcement, the unit also provides 24-bit/48 kHz audio capture and playback for recording in live situations or in the studio. As an audio interface, the DL32R can be paired with your Mac or PC computer, or you can record directly to a USB 2.0 hard drive without a computer. Featuring three stereo FX processors with reverbs and delays, and dedicated sends & returns, the DL32R can function as a versatile, all-in-one mixing and recording solution.

Features at a Glance:
  • Master Fader iPad app for complete wireless control
  • 32 microphone inputs (24 XLR + 8 XLR/TRS combo) with high-quality Onyx+ recallable preamps
  • 14 Fully assignable XLR outputs
  • 36 Input channels with 4-band PEQ + HPF, gate and compression
  • 28 Output busses with 4-band PEQ +HPF/LPF, 31-band GEQ, comp/limiter and alignment delay
  • 3 Stereo FX processors with tons of great-sounding reverbs and delays plus dedicated sends & returns
  • 6 VCAs
  • 6 Mute groups
  • Stereo AES digital output
  • Card slot for Dante expansion
  • Total recall for all settings




Sample Rate48 kHz
Bit Depth24-bit
System Latency1.5 ms (Analog Input > Main Bus > Analog Output)
Reference Level0 dBFS Reference: +22 dBu
Frequency Response±0, -1 dB, 20 Hz to 20 kHz
Distortion (THD)Mic Input to Main Output (1 kHz, -1 dBFS): <0.005%
Equivalent Input Noise150 ohm termination: -128 dBu
CrosstalkAnalog XLR input-input: <-105 dB @ 1 kHz (min. gain),<-80 dB @ 1 kHz (max. gain)
Analog XLR / TRS output-output: <-100 dB @ 1 kHz
Signal-to-Noise Ratio92 dB (ref +4 dBu, one channel and main fader at unity, A-weighted)
Output NoiseMuted Output: -90 dBu (A-weighted)
Dynamic RangeAnalog Input to Analog Output: 109 dB (one channel and main fader at unity, A-weighted)
Analog Input: 111 dB (unity gain, to analog clipping, -60 dBFS signal, A-weighted)
Analog Output: 111 dB (to analog clipping, -60 dBFS signal, A-weighted)
Analog InputsChannels 1-24: XLR balanced
Channels 25-32: Combo XLR / TRS balanced
Mic PreampsOnyx+
Analog Input ImpedanceChannels 1-24: 3 kOhms
Channels 25-32: 3 kOhms mic [XLR], 30 kOhms line [1/4"]
Max InputXLR: +21 dBu
1/4": +30 dBu
GainGain (digitally controlled analog): XLR: 0 to 60 dB [3 dB steps], 1/4": -20 to 40 dB [3 dB steps]
Phantom Power(XLR): 48 VDC, 10 mA max per mic, with up to 16 simultaneously. 5 mA max per mic, with up to 32 simultaneously. Individual digital controller per channel
Analog OutputsXLR balanced (Analog Outputs 1-12)
1/4" TRS impedance balanced (Analog Monitor Outputs L/R, supports balanced / unbalanced operation)
1/4" TRS Stereo (Analog Headphone Out)
Output Impedance600 ohms (Analog Outputs 1-12)
240 ohms balanced, 120 ohms unbalanced (Analog Monitor Outputs L/R)
Max Output+21 dBu (Analog Outputs 1-12)
+21 dBu (Analog Monitor Outputs L/R)
+18 dBu into 600 ohms (Analog Headphone Out)
AES OutputFormat: AES3 professional, 48 kHz, 24-bit stereo
Connector: XLR Balanced
Output Impedance: 110 ohms
StreamingConnection: USB 2.0 High Speed (as a device)
Connector: USB-B
Supported MS Windows [Driver installation required]: Windows 7, 8
Supported Mac OS [Audio Class 2.0 Compliant, no driver required]: OS X 10.8.4, 10.9
Audio: 32 in / 32 out, 48 kHz, 16/24-bit
Recording/PlaybackConnection: USB 2.0 High Speed (as a host)
Connector: USB-A
Audio: 1-24 channel, 48 kHz, 16/24-bit (multichannel .wav)
Supported Devices: USB 2.0 / 3.0 Class Compliant HDD
HDD Format: FAT32
Bus Power: 5V, 1A max
NetworkingConnection [Using Basic Network Option Card]: 100 Mb Ethernet
Control: Complete
Simultaneous Control: 10 iOS Devices
iPadiOS Version Requirement: 7.1 or greater required
iPad Version Requirement for Wireless: iPad 2, iPad (3rd generation),iPad (4th generation),iPad mini, iPad mini retina, iPad Air
Control Application: Mackie Master Fader App, Master Fader 3.0 or greater required
DSP36 input channels with 4-band PEQ + HPF, gate and compression (32 stereo-linkable input channels, 4 stereo-linkable return channels with PEQ and compression only)
28 output busses with 4-band PEQ + HPF/LPF, 31-band GEQ, comp/limiter and alignment delay (14 stereo-linkable aux sends, 6 stereo-linkable matrix busses, 6 stereo-linkable subgroups with PEQ and compression only, Main L/R busses)
6 VCAs and 6 mute groups
3 stereo FX processors (2 reverb, 1 delay) with dedicated sends and returns
Full I/O routing with A/B sources per channel
Modern and Vintage options per processor
PowerPower Requirements: 100 VAC - 240 VAC, 50 - 60 Hz, Universal Supply
Power Consumption: 100 watts max
Line Cord: User-replaceable IEC
Operating Temperature: 32 - 104˚F (0 - 40˚C)
Rack Spaces                                      3U rack spaces
Dimensions5.4 x 19.0 x 17.5" (138 x 483 x 443 mm)
Weight18.0 lb (8.2 kg)



Benzer Ürünler