The Shure Beta 58A dynamic vocal microphone is precision-engineered for professional live sound reinforcement and studio recording applications. A tailored frequency response accentuates clarity of vocals and a tight supercardioid pattern insures high gain-before-feedback, maximum isolation from other sound sources and minimum off-axis tone coloration.
Frequency responseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up. tailored for vocals, with brightened midrange and bass rolloff to control proximity effectWith a directional mic, more bass is added when the mic is closer to the sound source.Read moreGo to the glossary
Uniform supercardioidPicks up most sound in front of the microphone and very little from the sides, making it more directional than a cardioid mic. pattern for high gain before feedbackSustained howl when a mic hears a loudspeaker already reproducing that mic s sound. and superior rejection of off–axis sound
Neodymium magnet for high signal–to–noise output
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Minimally effected by varying load impedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.
Legendary Shure quality and reliability
Dynamic (moving coil)
50 to 16,000 Hz
Sensitivity (at 1kHz, open circuit voltage)
−51 dBV/Pa (2.8 mV) 1 Pascal=94 dB SPL
Net: 0.278 kg (0.62 lbs)
Three-pin professional audio (XLR), male
Ürünü sipariş verdiğiniz gün saat 17:00 ve öncesi ise siparişiniz aynı gün kargoya verilir.Ve ertesi gün teslim edilir.
Eğer kargoyu saat 18:00`den sonra verdiyseniz ürününüzün stoklarda olması durumunda ertesi gün kargolama yapılmaktadır.