RCF P1108-T Coaxial Hoparlör
The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.
In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil. The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).
- 100 W RMS
- Weatherproof cabinet IP 55
- Aluminium grill and stainless steel bracket
- One 8" high-output LF transducer with 1.5" voice coil
- One RCF Precision 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 2° x 15° enclosure sides for cluster configurations
- PTC Driver Protection
- LICC (Low Impedance Compensated Crossover) network
Acoustical Specifications
- Frequency Response -10 dB:80 Hz ÷ 20000 Hz
- Max SPL @ 1m:121 dB
- Horizontal coverage angle:90°
- Vertical coverage angle:60°
- Directivity index; Q:11
- System Sensitivity:95 dB
- Nominal Impedance:16 Ω
- Power Handling:100 W
- Peak Power Handling:400 W
- Recommended Amplifier:200 W
- Protections:Dynamic protection on Compression Driver
- Crossover frequencies:2200 Hz
Transducers
- Compression Driver:1" throat, 1.5" coil diaphragm assembly
- Nominal Impedance:8 Ω
- Input Power Rating:20 W AES
- Sensitivity:107 dB
- Woofer:8" woofer, 1.5" voice coil
- Nominal Impedance:16 Ω
- Input Power Rating:100 W AES
- Sensitivity:94 dB
Input Section
- Input connector:4 x 1.5 mm square 2 m Neoprene cable
- Constant voltage transformer:70/100
- Power Selection:70V/30W, 15W - 100V/60W, 30W
Cabinet
- Cabinet Material:8 mm Polyethylene rotomoulded
- Hardware:4 x M8 + U-Bracket and Pair of spacers
- Grille:Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
- Colour:Grey
Physical Specifications
- Height:266/10.47 mm/inch
- Width:493/19.40 mm/inch
- Depth:250/9.84 mm/inch
- Net Weight:12,5/27.55 kg/lbs
